Programa:
Idioma:

Liquefaction Analysis

Soil liquefaction is a phenomenon in which dynamic loading causes a significant reduction in the strength and stiffness of saturated cohesionless soils. The most common cause is the effect of earthquakes, during which repeated cyclic shear loading leads to an increase in pore water pressure within the soil. As a result, the effective stress between the soil particles decreases, and the soil may temporarily lose its ability to transmit shear stresses. Its behavior can then become similar to that of a liquid.

The soils most susceptible to liquefaction are loose to medium-dense sands, sandy gravels, and silty sands located below the groundwater table. In contrast, dense soils and cohesive soils with a higher content of clay particles are generally more resistant to liquefaction.

The occurrence of liquefaction can cause significant geotechnical failures, such as excessive settlement of structures, loss of bearing capacity of the foundation soil, failure of piping, failure of retaining structures, or slope instability. Therefore, assessing the potential for liquefaction is an important part of the design of structures in areas subject to seismic loading.

Liquefaction assessment is based on a comparison between the loading induced by an earthquake and the soil’s resistance to this loading.

  • The intensity of cyclic loading is expressed by the Cyclic Stress Ratio (CSR), which characterizes the shear stress generated in the soil during an earthquake.
  • The soil’s resistance to liquefaction is expressed by the Cyclic Resistance Ratio (CRR).

The assessment results:

The inclusion of individual soil layers in the assessment is described here.

Teste o software GEO5.
Gratuitamente.