The"Mesh generator" serves to define the basic setting to generate mesh (left part) and to view information about generated mesh (right part).
A successfully generated mesh completes the- the analysis then proceeds with the . When generating mesh the program introduces . Information about the resulting mesh including for possible weak points in the mesh is displayed in the right bottom window.
Correctly generated finite element mesh is the major step in achieving accurate and reliable results. The program FEM has an automatic mesh generator, which may substantially simplify this task. Nevertheless, certain rules should be followed when creating a finite element mesh:
- The basic mesh density can be specified in the "Mesh generator" dialog window. I is generally accepted that the finer the mesh the better the results - computation as well as post-processing, however, may slow down substantially. The goal thus becomes to find an optimum mesh density - this mainly depends on the user experiences. Meshes generated in example problems may serve as an initial hint.
Frame "Mesh generation" - a mesh with no local refinement
- The finite element mesh should be sufficiently fine in locations in which large stress gradients are expected (point supports, corners, openings, etc.). To that end, it is possible to specify the mesh refinement in the neighborhood of these locations. The mesh refinement can be specified around individual 3-5 times the desired refinement in the center of the refinement. Also, both values (density and spread of refinement) should be reasonable in view of the prescribed mesh density that applies to the surrounding region. This assures a smooth transition between regions with different mesh densities. Singular lines should be tackled in the same way. For more complicated problems it is useful to first carry out the analysis with a rather coarse mesh and then after examining the results to refine the mesh accordingly. or . The spread of refinement should be at least
Defining mesh refinement around a circular line
New mesh after refining the original mesh around a circular line
By default program assumes 6-node triangular elements with mesh smoothing. The accuracy of the results more or less corresponds to twice as fine mesh composed of 3-node triangular elements. The 3-node elements are available only in the " " mode (check box "6-node elements") and serve merely for research and testing purposes. The stability analysis, however, can be performed with 6-node triangular elements only. In case of nonlinear analysis, these elements should be used exclusively.
The "" mode allows also for the generation of mixed mesh (triangular and quadrilateral elements).